Turn your electric drill into a powerful water transfer pump. This compact and efficient drill-powered pump is ideal for transferring light liquids quickly and conveniently without the need for batteries or a separate power supply.
🔧 Key Features
-
100% Brand New & High Quality
-
Drill Powered Operation – Works with most electric drills (drill not included)
-
No Battery Required – Operates using drill power
-
High Flow & Efficient Performance
Flow rate depends on drill power and speed -
Compact & Portable Design – Easy to carry and store
-
Simple Installation & Easy Operation
💧 Suitable for Transferring
-
Fresh water
-
Sea water
-
Oil
-
Diluted organic solvents
-
Pesticides
-
Liquid fertilizers
⚠ Designed for light liquids only.
⚙ Performance Output
The flow rate varies based on drill wattage and rotation speed:
| Drill Power | Speed (RPM) | Output |
|---|---|---|
| 120W–350W | 1500–2500 RPM | 20–30 L/min |
| 350W–650W | 2500–3500 RPM | 30–40 L/min |
-
Maximum Flow Speed: 1.2 m³/hour
-
Inlet/Outlet Inner Diameter: 16mm
-
Outer Diameter: 19mm
-
Pump Handle: Hexagonal shaft
-
Color: Black
-
Size: As shown (1–3mm manual measurement tolerance)
📦 Package Includes
-
1 × Drill Pump
-
2 × Screws
-
2 × Silver Accessories
-
2 × Iron Fixing Accessories
-
1 × English Manual
(Electric drill and hoses are not included.)
⚠ Important Notes
-
For electric drills operating above 1500 RPM, the pipe length must not exceed 1 meter. Keep the pump on a flat, stable, dry surface during operation.
-
Ensure fluid enters the pump within 15–20 seconds after starting. If not, check that the inlet pipe is properly connected.
-
The pump relies on the pumped liquid for lubrication. Do not run it dry.
-
Keep all wires dry and always operate on dry ground.
