How to use:
1. Clean the dents with a clean damp cloth.
2. Insert the glue stick into the glue gun, pull the trigger to make the glue stick enter the glue gun, turn on the power and warm it up for 5 minutes.
3. Use a suitable pull gasket. Larger dents require larger stretch washers. (Note: The larger the pull gasket is, the greater the pull-out force will be).
4. Pull the trigger and apply the extruded glue to the extrusion gasket (the 4 holes of the gasket should be coated with hot melt).
5. Using a hot melt glue, quickly place the pull tab in the center of the dent and gently press until the glue hardens and adheres (let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be a little shorter in winter).
6. Align the T-shaped repairer, pull the washer with hot melt glue and pull the carriage back to pull up the dent.
7. Check with the circuit board, if the dent still exists, tap it gently with a flat hammer or pen.
8. Clean the repaired area with a clean damp cloth.
Specification:
Material: EVA
Size: 200*7mm/ 200*11mm
Color: Black
The softening point: 120℃
The melting point: 150~160~
Packing included:
5-30 x Glue stick.
