Product Description
About this item
1. The length of 4m can be used at a long distance, and it can be easily connected from one car battery to another.
2. Support a peak current of 2000A, suitable for models with displacement below 3.0
3. The jump start cable has excellent conductivity, red for positive and black for negative.
4. Comes with a practical storage bag for easy and compact storage without taking up space
5. Note: Please do not use a car with a large difference in displacement to rescue, so as to avoid excessive current and burn the live wire.
Jump Leads for Car
Jump leads for car are soft, flexible and tangle-free, resistant to freezing, cracking and folding, strong springs and comfortable handles for easy use.
The heavy duty jump leads has excellent conductivity and supports a peak current of 2000 a, and can be used to jump start a dead or weak battery and is suitable for vehicles with displacements up to 3.0.
Great for anyone who wants quality gear to keep with their vehicle or to help others in an emergency, ideal for trucks, suvs, small and mid-size cars.
The clamps have strong serrated teeth and springs to provide effective grip, strong springs allow the clips to hold the terminals well and not fall off.
The inner core of the pressurized cable is relatively thick, with high copper content and good electrical conductivity. the outer layer is covered with a soft plastic layer that is resistant to freezing and tearing. cold and high temperature resistant, not easy to crack and wear.
Ergonomic handle for easy grip and easy positioning for flexible and easy use.
Jump Leads for Car
Connection process:
1. Please make sure both vehicles are turned off before use.
2. Connect one end of the red clip to the positive pole of the tram battery, and the other end to the positive pole of the non-tram battery;
3. Connect one end of the black clip to the negative pole of the tram battery, and connect the other end to the metal position next to the negative pole of the non-tram battery, such as the frame bumper or engine block. It is not recommended to connect directly to the negative pole;
4. Start the engine of the rescue vehicle and run the engine at a medium speed. The depleted vehicle engine is then restarted to recharge the battery.
5. Disconnect the cables directly in the exact opposite order.
Jump Leads for Car
Disassembly process:
1. If electrolyte outflow residue is found near the positive and negative poles of the rescued vehicle battery, connect the black clip of the cable to the metal case near the rescued vehicle's engine.
2. Do not connect the black clip to the negative terminal that has electrolyte flow residue, it may cause problems like sparks.
3. Do not use a car with a large difference in exhaust volume for rescue, because it may consume too much current and burn out the connecting wires.
4. If you find that the car still cannot start, please check whether the metal contacts are in poor contact.
5. After completing the engine start, the starter hook cables must still be removed in order, otherwise it may cause a short circuit.
