Turn your electric drill into a powerful water transfer pump. This compact and efficient drill-powered pump is ideal for transferring light liquids quickly and conveniently without the need for batteries or a separate power supply.
🔧 Key Features
100% Brand New & High Quality
Drill Powered Operation – Works with most electric drills (drill not included)
No Battery Required – Operates using drill power
High Flow & Efficient Performance
Flow rate depends on drill power and speedCompact & Portable Design – Easy to carry and store
Simple Installation & Easy Operation
💧 Suitable for Transferring
Fresh water
Sea water
Oil
Diluted organic solvents
Pesticides
Liquid fertilizers
⚠ Designed for light liquids only.
⚙ Performance Output
The flow rate varies based on drill wattage and rotation speed:
| Drill Power | Speed (RPM) | Output |
|---|---|---|
| 120W–350W | 1500–2500 RPM | 20–30 L/min |
| 350W–650W | 2500–3500 RPM | 30–40 L/min |
Maximum Flow Speed: 1.2 m³/hour
Inlet/Outlet Inner Diameter: 16mm
Outer Diameter: 19mm
Pump Handle: Hexagonal shaft
Color: Black
Size: As shown (1–3mm manual measurement tolerance)
📦 Package Includes
2 × Drill Pump
2 × Screws
2 × Silver Accessories
2 × Iron Fixing Accessories
1 × English Manual
(Electric drill and hoses are not included.)
⚠ Important Notes
For electric drills operating above 1500 RPM, the pipe length must not exceed 1 meter. Keep the pump on a flat, stable, dry surface during operation.
Ensure fluid enters the pump within 15–20 seconds after starting. If not, check that the inlet pipe is properly connected.
The pump relies on the pumped liquid for lubrication. Do not run it dry.
Keep all wires dry and always operate on dry ground.
